Model Marine Supplies - 01803 400 827


Our products


Home » All Products

 Checkout

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »

 
AEROMARINE 1/4" x 24" (610mm) Flexi squared both ends
 
AEROMARINE 1/4" x 24" (610mm) Flexi squared both ends
Price: 12.45
Add to cart

 
Balance & Polish Stainless steel props
 
Balance and polish 215 up to 250 size props
Price: 9.00
Add to cart

 
Balance & Polish Stainless steel props
 
Balance and polish 255 up to 280 size props
Price: 10.00
Add to cart

 

Details 

These couplings are made to order
Price: Please call
Add to cart

14" x 5mm Ballraced shaft

Details 

Ballraced Propshaft  stainless steel 5mm shaft with lead teflon bottom bush, brass tube, brass bearing housing with shielded stainless steel ballrace, and brass nipple for lubrication. Up to 14" (360mm) long. The tube and shaft can be cut to length to make a tube length of  3" up to 14" . Propeller thread is M5, coupling end of shaft is plain 5mm..  

Ideally this shaft should be fitted with a skeg to support it at the prop end to prevent flexing and vibration
Price: 17.95
Out of Stock

16" x 5mm Competition Ballraced shaft

Details 

For 15cc and 27cc engines. Same as BR87 but wider skeg and longer tail bearing housing with 2 lead teflon bearings at the propeller end with wider skeg/propshaft support. Top ballrace housing is fitted with 19mm stainless steel ballrace and is not fitted so that the ideal shaft length can be obtained. Housing can then be soldered to the tube.  Stainless steel  lower bearing support. 5mm x 25mm strong  steel skeg, stainless steel tube, 8mm diameter for LOW drag. with stainless steel 5mm shaft.
Price: 29.95
Out of Stock

CABLE tie wraps

Details 

Nylon cable tie wraps (small)
Price: 0.75
Add to cart

C1 CMB ENGINES are to be PRE-ORDERED (Delivery approx. 10 days)

Details 

Engines are ordered as required. We receive them within 10 days of ordering
Price: Please call
Add to cart

C15003 CMB 45RS EVO Direct drive

Details 

CMB. 45RS EVO Direct drive
NEW ENGINE DUE IN APRIL


The latest version of the 45RS with the the 7.3mm crankpin & bushed front housing. The engine has a longer stroke than the 45Evo engines and delivers a lot more revs. A twin ballraced supported cranshaft & larger transfer ports. Engine is quite happy to run on 10% nitro but for best performance 16% to 25% nitro is recommended.
4.5HP at 31,000 rpm.
Bore 21.8mm
Stroke 20.0 mm.
Displacement 7.46cc
Note
Engine spares still available for the 45 Evo & 45 Evo 2/2 models.
No crank spares for the 7.2mm 2/2 crank rebuild.
Price: 463.95
Add to cart

C15004 CMB 45RS EVO Gear Drive

Details 

CMB 45RS  EVO Gear drive.
With the same spec. as the direct drive engine. A truly high reving 7.5cc motor. 4.5HP at 31,000 rpm. Now with the stronger 7.3mm crankpin & bronze bushed front housing seal.
Price: 463.95
Add to cart

C20010 CMB 45 W/c Header

Details 

CMB 45 water cooled manifold, complete with "O" ring and retaining spring
Price: 47.75
Add to cart

C30020 CMB 45RS Evo  Tuned pipe

Details 

CMB 45 RS Evo Tuned quiet pipe with fitted water cooling jacket and 90 deg. pressure nipple..

Standard silenced tuned pipe is discontinued and out of stock
Price: 76.98
Add to cart

C90327 45Evo 2/2 DISK

Details 

Disk valve for the 45 Evo 2/2 purple head engine
Price: 10.00
Add to cart

 

Details 

CMB 90 Speciel standard head button with cooling fins for better cooling of the haed and preserving plug.
Price: 15.00
Add to cart

 

Details 

CMB 90 Turbo head button.
Price: 25.00
Out of Stock

C90916 CMB 90 CRANKSHAFT

Details 

CMB 90 Evo 2000 complete crankshaft.
All spares available for crank rebuilds
Price: 115.96
Out of Stock

C90916EvoR CMB 90Evo rear crank half

Details 

CMB 90 Evo rear crank half, will also fit the Evo 2000 crank. Crank web is slightly smaller diameter.
Price: 35.00
Out of Stock

C90916R CMB 90Evo 2000 rear crank half

Details 

CMB 90 Evo 2000 crank half

Rear crank half for CMB 90 Evo 2000.

Price: 35.00
Add to cart

C90919 CMB 90 Front housing

Details 

Front housing for the 90 & 90Evo 2000 engines,



Price: 35.00
Out of Stock

 

Details 

Water jacket "O" ring (1).
Price: 1.15
Add to cart

 

Details 

CMB 67 HYdro and Evo 67 conrod
Price: 59.74
Add to cart

 

Details 

Piston pin retaining "C" clip.
Price: 0.30
Add to cart

 

Details 

Big end needle set
Price: 8.49
Add to cart

 

Details 

67 Hydro Crankshaft
Price: 59.82
Add to cart

C91113 Main bearing 67/80

Details 

CMB 67/80 Hydro big bearing with high speed cage
Price: 18.39
Add to cart

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »



 

Home
Products
Categories
Search
Contact Us

 Login Status

Not logged in

» Login

Search

Shopping cart
0 Product(s) in cart
Total 0.00
» Checkout

Home | Products | Categories | Search | Shopping Cart | Contact Us
Copyright ©2012 - Hosted by UK Prime.