Our products

 Aluminium servo mount clamp type for all standard servos

 Aeromarine large shallow radio box with tape down lid. will take up to 4 standard servos.

12" (300mm) x 3mm threaded push rod

A strong fibreglass moulded radio box. This one is designed for use in deep vee's and slopes from 65mm at the back to 50mm deep at the front. Allowing for the use of a 1/4 scale servo and two standard size servos to be stood upright. The box measures 4.65 x 5.5" and comes with a plexi glass lid which sits in a lip around the top internal edge. The box is also available in a shallower design where heigth is limited and allows the servos to be laid on their side.
Another lid is available for use with "D" rubber section to seal the lid down, add an extra £3.50 for this version"

Aluminium Oiler cup with stainless steel bracket 21mm diameter, 27mm long

Steel pushrod 2mm diameter 200mm long. with one end threaded 2mm

Anodized starter handle is easy to assemble and use. Pre wired it fits most Sullivan 12v and 24v starters and most other makes. Makes holding and using your starter much easier. Does away with the metal strip switch which eventually burns out.

DUBRO 12" Steel push rod with 4-40 threaded quicklink clevis connector at one end

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 5.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
A larger lid is available for use with "D" rubber section to seal the lid down using screws, add an extra £3.50 for this version"

Aeromarine push and twist cowling locks. Secures your cockpit lid quickly and securely, positivly one on the best on the market. Packet of 2, will split if required.

"O" ring cowl locks

Hatch fasteners, pull to release, push down to attach

Hatch fastening cowl locks, push down and turn to lock, turn to release. (2 pcs). (Chinese) A cheaper version of the Aeromarine cowl locks

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as cats, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 6.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.

Extender link for 3mm ball link for joining 3mm Kavan ball link to 3mm push rod.

Radio box rubber bung also suitable for saddle Tanks..

2 Aluminium  turn fins complete with mounting brackets and all s/s nuts and bolts. For fast electrics and small IC. monos

AEROMARINE 3M Waterproof radio box tape for use with tape down lids. The best you can get. does not leave a sticky residue on removal. 

 Aeromarine small stainlees steel turn fin suitable for hulls up to 43"

Large Aeromarine stainless steel turn fin 3.5" long for 36 + long hulls. A must to get you round those corners quicker."

Radio box brubber ballows (2)

Aluminium servo mount clamp type for all standard servos

Aeromarine aluminium servo tray for 1/4 scale servos measuring, 66.0 x 30.0 x 57.0mm. Easily mount your servos upright or lay down with these strong, aircraft aluminum trays. also available for standard size servos. SAVE £5.00 on NSP £10.95

<strong>Aeromarine</strong> Non return self bailers with filter for expelling water from inside the hull while in motion. Self seals when the boat stops

Waterproof radio box toggle switch with rubber toggle cap and seal. saves having to open your radio box to switch on.

Kit consists of two pillars. rubbers and T bar fixing bolts for fixing Prestwich or similar saddle tank into hull.

Aeromarine Aerial assembly. Reciever aerial feeds up through a nylon tube

Standard tank mounting kit for the Prestwich sadle tank. Kit consists of pillars and T bar bolts.

Stainless steel removable aerial with solder clip for receiver wire.