Our products

 Octura.3/16" (4.76mm)  flexi cable per foot (300mm)

Octura .098" flexi cable, per 12" (305mm)

Aluminium Oiler cup with stainless steel bracket 21mm diameter, 27mm long

Octura flexi cable .130" (3.2mm) per 12". (305mm)

Octura Right hand lay flexi cable 24" x .130"RH. for clockwise rotation of prop.

Octura flexi cable .150" (3.8mm) per 12" (305mm)

OCTURA Flexi Cable .150" (3.8mm) x 24" right hand lay cable for clockwise rotation of prop

Octura flexi cable 1/4" diam. per 12"  (305mm)

NEW Brass coloured stiffer HD Octura flexi cable 3/16" diam. (per foot)
Also available in right hand winding"

Octura Right hand lay 24" x 3/16" (4.76mm) cable

Octura Right hand lay 3/16" (4.76mm) cable

OCTURA 24" x 3/16" flexi cable squared at one end

A 24 X 1/4" square ended cable at one end to fit into squared collet coupling or to a ferrule to connect to stub shaft.



Also available in right hand lay 24" x 1/4"

OCTURA 24" x 1/4" Right handed flexi cable

OCTURA Right handed 24" x 1/4" flexi cable squared at one end, only use for opposite rotation engines and props.

OCTURA 36" x 1/4" flexi cable squared at both ends. Ideal if you only need 18" or less lengths as this can supply two.
"

.098" Teflon tubing per foot length, for use with Octura .098" flexi cable only"

.130" (3.2mm) teflon tubing for use with Octura .130" flexi cable or 1/8". Fits 7/32" K&S brass tubing.
Sold per 12" (300mm) any length cut.

.150" Teflon tubing per foot. For use with OCTURA .150" (3.8mm) flexi cable only.

3/16" Teflon tubing sold by the per inch,
To be used with 3/16" flexi shafts and cable. Fits K&S 9/32" brass tubing

.250" (1/4") Teflon tubing per inch, (25mm) To be used with 1/4" cable. Fits 11/32" K&S brass tubing
When using teflon in a metal prop tube, grease should not be used to lubricate the cable, the best lubricant is car engine oil such as 20/50.

AEROMARINE 1/4" lead teflon sleeve bearing. <strong>SPECIAL OFFER. NSP. £2.40 per pack of 2 

Ali T-BAR prop tube support brackets for supporting the prop tube between 5 stringers. Brass lubricating point for shaft lubrication.
Fits 11/32"  and 5/16" OD. prop tubes     (HF100)

T-BAR for 11/32" & 5/16" prop tube with oiler

NEW CNC machined aluminium COMPETITION T-Bar propshaft support with oil resovoir for lubricating the shaft. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's etc. Each end is adjustable for length, oil resevoir inside.