Our products

A 1240 series propeller with a 1.2 : 1 pitch. Very suitable for submerged use on 3.5cc to 4.5cc mono hulls. Also available in glass filled plastic. 1.57 diam. x 1.88" pitch"

A 3 bladed version of the 1240. Ideal for submerged drive on .40 & .45 motors.
1.57 dia. x 1.88" pitch"

Smallest of the 1200 plastic props. Ideal for submerged use with a 3.5cc motor

Another new metal propeller from Octura in the 12 series. Suitable for submerged drive on .40 and .45 sixe hulls. Also available in glass filled plastic at £1.40.
1.77 dia. x 2.12" pitch."

This propeller is ideal for 6.5 to 7.5cc conventional drive models, also available in right hand rotation for twin drive set ups in glass filled plastic only.

Right hand rotation 50mm prop for twin set ups

Ideal prop with a 10 or 11cc conventional drive mono

These props are very strong and have been used successfully with 26cc petrol engines using conventional underwater drive. Prop has a 3/16 bore."

Brass reducer to insert into 3/16" bore prop hub to go onto 4mm shaft.

One of the original props from OCTURA.
These have a low 1.2:1 pitch to diameter ratio with a 3/16 bore for drive dog use. They are ideal for convetional underwater use. Most are made in glass filled plastic but Octura have recently produced a few of them in BeCu, a 1240 a 1240/3 and a 1245 along with the 1250. These have found use on both IC motors and electric motors. Also available in 1400 series which is 1.4:1 pitch.
1240 plastic and becu
1240/3 becu
1245 plastic and beCu
1250 plastic
1250 becu 1250RH plastic
1255 plastic  use on 10 to11cc coventional drive
1270 plastic 3/16" bore"

Balance and polish 2 blade props 67mm and to 82mm.

Balance and Polish 3 blade props 35mm up to 50mm