Our products

Nylon cable tie wraps (small)

Upgraded Radio box from previous version, VERY strong  plastic with bolt down lid, built in rubber seal, 2 bellows, all screws, nuts, screw in cap for radio switch or charging and servo tray for 2 standard size servos. The best radio box we have seen, with very strong main body.  Lid is 150mm x 150mm, body is 128mm x 128mm and 65mm deep including cover.

Fits between 5" rails,

12" (300mm) x 3mm threaded push rod

A strong fibreglass moulded radio box. This one is designed for use in deep vee's and slopes from 65mm at the back to 50mm deep at the front. Allowing for the use of a 1/4 scale servo and two standard size servos to be stood upright. The box measures 4.65 x 5.5" and comes with a plexi glass lid which sits in a lip around the top internal edge. The box is also available in a shallower design where heigth is limited and allows the servos to be laid on their side.
Another lid is available for use with "D" rubber section to seal the lid down, add an extra £3.50 for this version"

Steel pushrod 2mm diameter 200mm long. with one end threaded 2mm

DUBRO 12" Steel push rod with 4-40 threaded quicklink clevis connector at one end

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 5.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
A larger lid is available for use with "D" rubber section to seal the lid down using screws, add an extra £3.50 for this version"

A strong MEDIUM sized fibreglass moulded radio box. This one is designed for use in shallow hulls such as the sprintcats, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 6.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.

 A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 7.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.

Extender link for 3mm ball link for joining 3mm Kavan ball link to 3mm push rod.

Heavy duty ball link for 3mm threaded rods

Radio box rubber bung also suitable for saddle Tanks..

AEROMARINE 3M Waterproof radio box tape for use with tape down lids. The best you can get. does not leave a sticky residue on removal. 

The DU-BRO E/Z/ Adjust Ball Links are heavy duty with a adjustable ball joint clamp

Radio box brubber ballows (2)

The easy way to install your standard size servo into the radio box. Servo lugs slide into the brackets once they have been secured onto the side or bottom of the box. For mounting all standard size servos. Very secure.

Aeromarine aluminium servo tray for 1/4 scale servos measuring, 66.0 x 30.0 x 57.0mm. Easily mount your servos upright or lay down with these strong, aircraft aluminum trays. also available for standard size servos. SAVE £5.00 on NSP £10.95

"D" section radio box closed cell sealing foam. Stick down with cyno glue

Neoprene self adhesive closed cell sealing foam to seal screw down radio box lids etc.. 5mm x 12mm x 950mm long.

MTronics Waterproof micro single channel failsafe for use with 4 and 5 cell receiver packs. Easy push button setup. Duel operation LED's. Low voltage sensing.

Waterproof radio box toggle switch with rubber toggle cap and seal. saves having to open your radio box to switch on.

Futaba/ heavy duty wired switch harness with charge lead. 300mm

Futaba HD switch harness with plug retaining clip and charge lead

Aeromarine Aerial assembly. Reciever aerial feeds up through a nylon tube

Stainless steel removable aerial with solder clip for receiver wire.

400mm Extension aerial for Futaba FASST, Hitec  receivers. Just plug in.

£3.99 each

A must for your radio box battery.
Dont loose control, keep a check on the battery state. Battery checker switchable for 4.8v/6v battery packs.