Our products

 Removal of the prop ears and reprofile

Threading of 1/8" bore drive dog propeller

Brass reducer to insert into 3/16" bore prop hub to go onto 4mm shaft.

 X452 used and balanced and polished. (No Marks, no longer required)

 Used Octura X457 balanced and polished. (No Marks, no longer required)

Used Octura X457/3 balanced and polished. (Unmarked, No longer required) 

The OCTURA® balancer consists of an extruded ali base incorporating two parallel steel rods for the prop balancing rod to roll on. There is a levelling screw in the base and three imperial size rods for the props. 1/8", 3/16" and 1/4", which are stored in the base body, plus instructions

 1/8" bore which we can thread 4mm if required. 27mm dia. 1.5" pitch

 Ideal for fast electrics. Prop has a 1/8" bore which can be threaded 4mm. 30mm dia. x  1.65" pitch"

A reverse rotation prop for twin drive set ups.

 1/8" bore can be threaded 4mm. The material used in these props is very strong. 31mm diam. x pitch 1.71"

  



Prop has a 1/8" bore which can be threaded 4mm. 32mm dia. x 1.67" pitch.

 The largest of the X4 series with a 1/8" .125" bore"

 The ideal prop for 3.5cc outboards. Also good on 3.5cc monos and cats

Right handed rotation for use when contra rotating props are required NEW Octura X437/3 RH 3/16" bore. 1.48" dia. x 2.072" pitch

 Great prop for 3.5cc motors

Good Mono/Cat prop for use with 3.5cc motors

Suitable for surface & semi surface application for 3.5cc motors

Right handed rotation for use when contra rotating props are required

 A good prop for high torque 3.5cc motors. This prop is now also available in right hand rotation for twin drive applications"
Equivalent prop. = Prather P220

 A good prop for 6.5cc to 7.5cc low power motors and equivalent electrics such as the graupner 700 series

 pitch 2.90" 1.85" dia. x 2.59" pitch. Also available in right hand rotation. A great prop for the surface drive mono with 7.5cc motors"

UNAVAILABLE;FROM OCTURA®

One in stock balanced and polished. A 3 bladed version 1.85 dia. x 2.59" pitch. Ideal prop for .40/.45 engines running full surface or semi surface drives."

OUT OF STOCK
A right hand rotation prop.

Octura® BeCu drive dog prop 1.4 x 1.9 diam = 2.66" pitch. 3/16" bore

 Ideal prop for surface drive monos with 7.5cc to 10cc motors using high nitro and for 7.5cc cats. Octura BeCu drive dog prop 1.4 x 1.97 diam = 2.76" pitch. 3/16" bore

Suitable for high torque 7.5cc motors. Ideal for 10-11cc monos semi and surface
This prop is now also avalable in right hand

Right handed rotation for use when contra rotating props are required. A 50mm 3 blade right hand rotation prop.

 An Ideal prop for surface and semi surface drive 10cc - 11cc monos and cats.

Ideal prop for 11cc surface drive hulls