Our products

The smallest 1400 prop, same pitch as the X4 series but has slightly more lift.

The smallest of the glass filled plastic 1400 series props

Ideal prop for 3.5cc hydros/riggers

Good prop for high nitro powered 3.5cc engined riggers.
Also good for 10-11cc conventional drive monos.

Good prop for 7.5cc riggers. and powerful 3.5cc riggerswith very high nitro.

Excellent prop for 7.5cc riggers

Great prop for 7.5cc riggers/hydros and 15cc conventional drive monos.

Excellent 7.5cc rigger/hydro prop.

Idael prop for a 7.5cc riggers and 15cc submerged drive deep V's

A 57mm right hand rotation prop, made of glass filled plastic which is very strong for normal use.

good 11cc hydro/rigger prop

Great 11cc - 13cc hydro/rigger prop

This prop has a 1/4 bore and is suitable 13 to 15cc riggers, can also be used on 15 to 26cc monos where the prop is semi serface drive."

Ideal prop for use on a 15 to 26cc rigger.

This prop has a 3/16 bore."

The largest of the 1400 series. Good for 15cc riggers on high nitro & 26cc petrol riggers

Threading of 1/8" bore drive dog propeller

Brass reducer to insert into 3/16" bore prop hub to go onto 4mm shaft.

The OCTURA® balancer consists of an extruded ali base incorporating two parallel steel rods for the prop balancing rod to roll on. There is a levelling screw in the base and three imperial size rods for the props. 1/8", 3/16" and 1/4", which are stored in the base body, plus instructions