Our products

 Speedmaster SPDSB-10-250F large flat bottom strut.

SPDSD2-G250 Gas - 1/4" Shaft 3 Bolt Transom Bracket Comes with 24" Square Drive Cable Has 4mm Titanium Adjustor Turnbuckle Length Approximately 6" to Prop Tips.

SPDSD3-G250 Gas - 1/4" Shaft Comes with 24" Square Drive Cable Has 5mm Titanium Adjustor Turnbuckle Length Approximately 6" to Prop Tips.

Speedmaster 3/16" soldered flange brass bushing for 3/16" struts

Speedmaster 1/4" soldered flange brass bushing for struts

Speedmaster brass 3/16" bushing with flange.

USA import SPEEDMASTER Brass sleave flared bushings for the stinger drive units. 3/16 & 1/4". These are brass sleaves, crossed drilled to hold the lubricating grease."

Speedmaster high quality ali strut with skeg, suitable for 3.5 to 7.5cc set ups. and fast electrics Needs to be fitted with 3/16" brass bushing bearing @ £6.95

NEW SPDS-17SK Speedmaster small CNC strut blade with skeg. Ideal for 21.45 set ups on smaller hulls and fast electrics Needs to be fitted with 3/16" brass bushing bearing @ £6.75

SPEEDMASTER CNC machined strut blade only with skeg and 1/4" sleeve bearings fitted.
SPDS-013-SK Large Skeg Strut Assy. With bracket, mounting bolts etc. and bearings fitted  £35.95

This is the NEW heavy duty HIGH QUALITY version of the stinger units from Speedmaster, now with a 3 hole mounting bracket, suitable for the larger petrol engines from 23cc up to 35cc. The unit takes a 1/4 flexi shaft and is adjustable vertically and shaft angle. Also suitable for 15cc + glow motors.
"

An adjustable drive unit suitable .21 - .65 engines using a 3/16 flexi shaft. Stinger length is 80mm (3.25") Also suitable for fast electrics and the OMRA "Z" class boats.

A modification we can make is to replace the brass sleave bearing with Lead teflons."

The SPEEDMASTER Stinger adjustable strut is CNC machined from high grade aircraft aluminum. For use with 1/4" shafts. Strut is adjustable vertically on the transom as is the shaft angle. The unit is available with 1/4" sleave bearings instead of the standard brass bushing, as a modification if required.

The transom mounting has a 3 holes mounting bracket.

 Brass sleeve for skeg strut and struts for soldered flange brass sleeve bushing SPDS-015

 SPDS-008-200XB Large  2" extruded ali strut brackets

Genuine Speedmaster CNC alluminium strut blade with skeg and bracket..
Needs to be fitted with either 1/4" sleeve bearings or the brass bushing.
Made from high grade aircraft aluminum it comes complete with transom mounting "L" bracketS and fixing screws. The skeg helps to hold the hull in turns and is an added aid for protecting the propeller.
With brass sleeve and bushing fitted £43.90

The unit can also be modified with reducers and fitted with 3/16" lead teflon sleave bearings, £42.65.

 SPDS-13SK Speedmaster CNC Large skeg strut blade only.
brass sleeve has to be inserted for use of brass bushing
Needs fitting with either brass soldered end bushing at ££7.95 sleeve and bushhing
or 1/4" lead teflon sleeve bearings. (2 or 3) at .90p each

AEROMARINE 1/4" lead teflon sleeve bearing. <strong>SPECIAL OFFER. NSP. £2.40 per pack of 2