Our products

Zenoah water pump complete with piping and Iso Block. A must for engines fitted with a clutch but can be used without a clutch being fitted. Water is being circulated at all speeds.

Needs to have the modified carb Isolation block with a pressure nipple fitted

CS62 NO LEAK exhaust flange. CNC aluminium watercooled flange that does not allow the possibility of a water leak into the exhaust gas and is machined so that the viton o-rings stay in position. Fits most 22mm 7/8" header pipes and includes one set of viton o-rings..

X457/3 BeCu propeller siutable for surface & semi surface drive boats using .90 to . 101 size engines. with 3/16 bore"

Nylon cable tie wraps (small)

Auto bailer that can be taken apart for cleaning

OCTURA OCFHO6518 two part hardened 6mm threaded coupling with spigot to 3/16" cable, fits OPS 65/80 engines and engines with 6mm crankshafts.

Standard size 4.8v/6v double ballraced output shaft, water resistant servo. Fairly fast at .16ec/60deg. with 6.5Kg at 6v. Ideal for throttle & mixture control and medium size wedge rudders.

A 4.8v/6v standard size, medium torque quality bouble ball raced, water resistant servo. 5.0Kg. Ideal for the medium rudder on monos, cats & hydros and all other applications

Control cable to operate carburettor lever

Reverse rotation prop for use with twin drive setups

Non return self bailers for expelling water from inside the hull while in motion. Self seals when the boat stops

OCTURA 6mm threaded coupling with spigot for OPS 67/80 to 1/4" cable

 Very good prop for 15cc boats on surface drive and submerged 26cc petrol engines.

Dubro Hi Flow large fuel filter for petrol or glow

Heavy duty 300mm silicon "Y" leads with Futaba plugs

 avan pressure carburettor with 14mm spiggot. These German made precision carburettors are fitted with a pressure relief valve, which operates as the valve is throttled back it releases any high pressure in the fuel tank, on a pressurised system, that would cause an over rich mixture at slower revs of the engine/  <srong> with setting up instructions

CMB45 Twin needle Carb with third channel mixture control

OCTURA 8mm threaded coupling with spigot to 3/16" cable for engines such as the PICCO 65/80 with an 8mm thread.

This is a 4.8v/6v standard size Heavy Duty, double ballraced, metal geared servo with a 8.9Kg torque at 6v.
Ideal for rudder control on large hulls and where extra power is required.
Size
40 x 20 x 38.1mm

Stainless steel 22mm narrow bend 90 deg. header 45mm from flange to centre line of pipe

An great prop for the 15cc. size engines running surface drive on monos and cats.
2.36 dia. x 3.30" pitch. with 3/16" bore."

The large pattern OCTURA coupling with a spigot for connecting engines with an 8mm thread such as the CMB 67/80 to 3/16" cable.

10 Double sided high impact servo mounting pads.

Largest of the Futaba 61. This 1/4 scale 24Kg at 6v metal geared water resistant servo has made a niche in the market for powerful large scale models.

Dimensions. L66mm x W30mm x H57mm

S/s 22mm, 90 degree medium bend header, 57mm from flange to outside of pipe

 Good prop for high powered 15cc surface drive and 26cc submerged drive boats

Hand cranked duel fuel, petrol/glow, pump, self priming.

Eneloop 4.8v Ni-MH 2000mAh  Rx battery pack.  Superb charge retention - 90% after 6 months, and 85% even after a year

Wide bend 22mm diam. 90 degree stainless steel header, 67mm from flange to outside of pipe.

Space saver Stainless Steel header for Zenoah and its derivatives.