Our products

ABC 2716-10-50(3) CLL cleaver racing prop 2.7 x 4.320" pitch, ideal for 15cc glow and 26cc petrol powered hydros/riggers"

Heat racing prop. 2.7 diam. x 4.32" pitch. Great prop for 15cc nitro and 26cc petrol powered hulls.

C.M.B. 80  Hydro Racing
The big brother to the 67 with a bigger capacity & more torque, enlarged transfer ports. Comes complete with the twin needle carb.

45RS crankcase

A sturdy CNC aluminium float chamber for 15cc. Motorcycle type valve and float for reliability. Includes CNC aluminium mounting

An all round .45 heat racing Hydro prop. 59mm (2.28") x 76mm (3.3" cupping)

Aluminium 90 deg. side exhaust manifold to fit SC or ASP 91 engines

CNC B49.5 (1924) For use on geared 3.5cc

Stainless steel 3/16" x 2.5" stub shaft with a 5mm thread. Shaft is counter bored to take either .130" or .150" flexi cable.  Shaft can also be bored for 2mm and 1/16" wire drives.

Longer or shorter lengths can also be supplied. State when ordering

OCTURA Electric motor coupling for 5mm smooth motor shaft connecting to .062 (1/16") wire drive system.

Also available for 1/8" motor shaft to .062" wire drive"

Wedge rudder glass filled tiller arm for the Octura Rudder

Stainless steel surface drive .45 prop. Comparable to Octura X447

20" x 5mm stainless steel prop shaft & 8mm tube.
This is the longest length available

SPEEDMASTER CNC machined strut blade only with skeg and 1/4" sleeve bearings fitted.
SPDS-013-SK Large Skeg Strut Assy. With bracket, mounting bolts etc. and bearings fitted  £35.95

This is the NEW heavy duty HIGH QUALITY version of the stinger units from Speedmaster, now with a 3 hole mounting bracket, suitable for the larger petrol engines from 23cc up to 35cc. The unit takes a 1/4 flexi shaft and is adjustable vertically and shaft angle. Also suitable for 15cc + glow motors.
"

An adjustable drive unit suitable .21 - .65 engines using a 3/16 flexi shaft. Stinger length is 80mm (3.25") Also suitable for fast electrics and the OMRA "Z" class boats.

A modification we can make is to replace the brass sleave bearing with Lead teflons."

The SPEEDMASTER Stinger adjustable strut is CNC machined from high grade aircraft aluminum. For use with 1/4" shafts. Strut is adjustable vertically on the transom as is the shaft angle. The unit is available with 1/4" sleave bearings instead of the standard brass bushing, as a modification if required.

The transom mounting has a 3 holes mounting bracket.

 1/4" Stinger drive VS3 Adjustable 125mm long. Very strong CNC machined aluminium drive unit with adjustment for shaft angle and fitted with lead teflon bushes. For all 1/4" flexis shafts, welded type..

1/4" Stinger drive VS3 Adjustable 105mm to 125mm long. Very strong CNC machined aluminium drive unit with adjustment for shaft angle and stinger length and fitted with lead teflon bushes. For all 1/4"flexis, welded type..

Wire drive glued/silver soldered (.098") 2.5mm to 2.5" x 4mm stub shaft
Wire drive .(098") 2.5mm to 2.5" x 3/16" stub shaft.
 State lenth when ordering

Right handed rotation for use when contra rotating props are required NEW Octura X437/3 RH 3/16" bore. 1.48" dia. x 2.072" pitch

Zenoah complete recoil pullstart and housing

Genuine Zenoah EZ pullstart. A much easier to use pullstart than the standard recoil drive dog one fitted to marine engines. Comes with all parts required to easily fit, Complete instructions sheet included.

BH_Hanson_Clutch This new clutch comes with a billet housing and a ventilated metal clutch bell. It's supplied with Zenoah clutch shoes, clutch housing, all mounting hardware and Aeromarine collett with your choice of round or square drive. The clutch is designed to be used with one of our clutch mounts or any mount using the Zenoah bolt pattern.

BH_Hanson_Clutch for G320 This new clutch comes with a billet housing and a ventilated metal clutch bell. It's supplied with Zenoah clutch shoes, clutch housing, all mounting hardware and Aeromarine collett with your choice of round or square drive. The clutch is designed to be used with one of our clutch mounts or any mount using the Zenoah bolt pattern.

 Great prop for 3.5cc motors

 

OCTURA 3/16" id x 3/8" OD. Use with prop hub of 3/8" diam. ie. 45mm up to 65mm.