Our products

Largest of the right hand drive X6 series props.

The largest of the series with a 1/4 hub bore, suitable for the 15cc + riggers. the prop has a pitch of 5.01""

"T" piece connector for joining fuel or water pipes

OCTURA Plated hardened plated steel  with 3/16" bore. 7/16" od.

A 24 X 1/4" square ended cable at one end to fit into squared collet coupling or to a ferrule to connect to stub shaft.



Also available in right hand lay 24" x 1/4"

OCFHE1813 hardened plated steel electric motor collet coupling for connecting a 1/8" motor shaft, ie. 540 type motor to .130" (3.2mm) flexi cable

90 degree chromed 5mm threaded water nipple

90deg. heavy duty 6mm brass water nipples Ideal for the petrol engines and where a high flow is required.

Aluminium servo mount clamp type for all standard servos

ABC 2914-10-50(2) CLL Racing prop. 2.9 (75mm) x 4.060" pitch.

 Aeromarine 30" x 1/4" stepped to 3/16"

The CMB 27cc engine.
A completely new 27cc petrol engine which is capable of 22.000rpm. Comes complete with exhaust header & coupling.

CMB 45 piston pin, all 45 engines

CONQUEST 43.5" in Carbon Fibre

The latest edition to the cat range of hulls from Aeromarine. This hull has been specially designed for the use of Zenoah type engines and high performance 15cc + glow engines.

Excellent 15cc hydro heat racing prop with a medium lift. 68mm dia. (2.68) x 102mm pitch, 4" (cupped to 5")"

1 Litre (1000ml.) IV petrol bag

Kali type aluminium coupling for 15cc, M8 threaded x 5mm plain. The best coupling for 15cc motors in FSRV 26mm diameter x 40mm long

The famous OCTURA Strudder unit fitted with 3/16" bearings and nose piece to take the 9/32" brass prop tube.

A 55mm Ali bar is supplied to offset the rudder. 

Stainless steel prop. Comparable to the Octura X450

This pipe is suitable for use on the 67 and 80 engines. Large nitro  pipe (unsilenced)

SPEEDMASTER Tapered twin pick up rudder blade only,

Speedmaster  twin pickup tapered wedge rudder blade with a 4" extended bracket.

Can be bored for .130" (3.2mm)  or .150" (3.8mm) cable. Please state when ordering.

Wire drive, silver soldered .2.5mm  to 2.5" x 3/16" stub shaft.

Suitable for surface & semi surface application for 3.5cc motors and electrics with 36/40mm cans.

Now made in Aluminium Bronze

 Largest of the X6 series, great prop for 30cc to 35cc petrol engines Mnnos and 15cc riggers

"Y" connector 3mm bore, suitable for water, fuel or pressure feed.

 "Y" connector 3mm bore, suitable for water or fuel