Our products

Bobbin coupling 6mm threaded to 5mm plain or threaded.

Please state type when ordering

MMS 24" x 3/16" flexi shaft made with heavy duty gold anodised cable.

MADE TO ORDER ONLY 10 to 14 days. The Giant Apache. This large 56" Offshore deep V hull is suitable for the most powerfull of engines from 15cc up to 35cc, even a twin installation. Over the years it has had much racing success and is suitable for use in the roughest sea and lake conditions. UK delivery charge £28.00

DUBRO 12" Steel push rod with 4-40 threaded quicklink clevis connector at one end

Aeromarine polycarbonate large single width tabs. Easily adjusted with a turnbuckle. very strong. 1.75" wide x 2" long

A 40mm diameter 2.1" pitch, cleaver prop suitable for .21 Rigger/Hydros and fast electric riggers with suitable power.

ABC 1816 cleaver prop 1.8" (45.72mm) x 1.6" pitch, (2.88")

Aeromarine 1/4"unf. Stainless steel nylock prop nuts, pack of 6.

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 5.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.
A larger lid is available for use with "D" rubber section to seal the lid down using screws, add an extra £3.50 for this version"

A strong MEDIUM sized fibreglass moulded radio box. This one is designed for use in shallow hulls such as the sprintcats, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 6.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.

CMB CMB 21 Evo.4 Gear drive


Spares still available for the 21LS

Turbo plug head button

Great hydro prop for high revving .21 engines. 44mm (1.74" dia) x 66mm (2.75" pitch cup)

New mocom CNC prop 50.5mm diam. x 69.5mm pitch replaces 2023

Octura V-65 engine mount insert cradle only

Stainless steel 2" x 1/8" prop shaft bored for .098" cable. Shaft used for the 1/8" bored props.

 O.S. R5 cold short reach glow plug for medium to high nitro use. We have used this plug successfully with 40% nitro.

Prather stainless steel surface drive prop suitable for 3.5cc engines.

Comparable to Octura X440

8" x 5mm stainless steel prop shaft & tube

Sullivan rigid 24oz. duel fuel tank, comes with fittings for petrol use as well as glow fuel.
Size: length 181mm x 76mm width x 60mm high.

 <strong>SPEEDMASTER</strong> Electric motor S/steel 10mm to 1/4"  flexi cable coupling

Speedmaster 1/4" soldered flange brass bushing for struts

TO CLEAR
Red Nylon prop with 5mm thread

glass filled nylon prop X40mm with 5mm thread.

Using a "X" blade pattern, these glass-filled nylon props have a much higher strength and rigidity than their nylon counterparts making them ideal for use with high power marine engines. Each prop features a moulded-in brass insert

THE Hanson G260 Pro Modified engine is one of Hansons most popular engines. Modifications include lightweight piston, increased compression, enlarged exhaust, intake and transfer ports, increased intake and exhaust timings, a balanced flywheel, recoil ring, big bore WT257 carb .
A balanced and trued crankshaft, bearing set for crankshaft end play and low drag seals can be fitted for an extra £25.95

Great 7.5cc rigger/hydro surface prop

Can't quite drive that X445 then fit the M445

Now made in Aluminium Bronze

A reverse rotation prop for twin drive set ups.