Our products

 <strong>SPEEDMASTER</strong> Electric motor S/steel 8mm to 1/4" flexi coupling

Speedmaster brass 3/16" bushing with flange.

TO CLEAR
Red nylon prop 45mm diam. X series prop with 4mm thread

Red nylon plastic prop, 45mm with a 5mm thread

X45 glass filled plastic with a 5mm thread

Radio Active glass filled nylon X50 x with 5mm thread

Zenoah 300PUM 29.5cc NEW with 36mm bore piston and the EZ pullstarter to make starting much easier and quicker. plus1048 carb.

The latest upgrade to the Zenoah 300. .
ZENOAH 310 2+2 Pro Mod with 2mm Stroker Crank 30.5cc 1048 carb, all Zenoah parts. .
Modifications Include: Adjusted Intake & Exhaust Timing, Enlarged Exhaust & Intake Window Areas, Enlarged Transfer Ports, M-Cut Lightweight Piston & Balanced Flywheel.
Add 1027 walbro modified carb inplace of 1048  +£25.00

Good high torque 7.5cc - 10cc rigger/hydro prop. 50mm diam. x 3.74 pitch. Balanced & polished +£5"

This is the ideal prop to replace the Prather 275 prop. The Octura prop gets a better bite of the water and has a lot less slip thus giving higher top end speed.

Your X447 loading your engine too much. no need to modify it, just fit the M447.

 1/8" bore can be threaded 4mm. The material used in these props is very strong. 31mm diam. x pitch 1.71"

 

Octura flexi cable .150" (3.8mm) per 12" (305mm)

Rubber 20mm x 15mm bobbin coupling 1/4"unf to 5mm plain shaft

OCTURA 3mm bore brass water outlet

Extender link for 3mm ball link for joining 3mm Kavan ball link to 3mm push rod.

Aeromarine Challenger 43" Classic. This hull has the driver cockpit lid. suitable for 6.5cc to 11cc motors and fast electrics

SPEEDMASTER stainless steel 3 part coupling 6mm plain to .150" (3.8mm)

Aeromarine OPS 21 Engine mount

NEW DESIGN 2215-17-45 2 blade cleaver prop

New series ABC bronze prop 2215-19-38 2 blade cleaver

USED  S/h   

CMB 91 W/C. Exhaust header 22mm diam. 18deg.

CMB 45 8 thous. alloy shim

ABC good hydro prop. for .21 engines. 45mm x 68mm (2.7) with 2.9" cupping"

Hyperformance  24"  x .187" (3/16") high quality flexi shaft 

 Hyperformance  27.5" x 1/4" quality flexi shaft  (700mm)long

OCTURA OCGCSL 3.25" s/s stub shaft, 4mm stepped up to 3/16". Complete with drive dog, washer and retaining nut.  A replacement shaft for any 4mm bearing struts such as the Graupner or Kyosho drives allowing a 3/16" bore prop to be used.  Can also be fitted with .130 or .150 cable to make a complete flexi shaft.

Stainless steel surface drive prop for high torque .21 engines. Comparable to Octura X442